Homeowners · Challenges

Sinking or Uneven Floors

Sinking or uneven floors are often caused by weak or poorly compacted soil beneath the foundation. Water infiltration and long-term loads can further reduce soil stability, resulting in differential settlement and floor deformation.

Overview Conditions Engineering approach Project evidence Resources

Engineering overview

Causes of Sinking or Uneven Floors

What to assess

Typical Performance

Visible dips or low spots in floors

Sloping or noticeably uneven floor surfaces

Gaps between floors and walls or baseboards

Cracks in floor slabs or surface finishes

Loose, hollow or displaced floor tiles

Doors and cabinets that become difficult to open or close

Staged injection · real-time measurement

Our approach

How Hengxiang Hongye Performs Remediation

Through our non-destructive and controllable patented technology, the weak soil layer of the holding layer is consolidated as a whole, and the consolidated and reinforced foundation soil forms a composite foundation, whose bearing capacity value can reach nearly three times of the original bearing capacity, and well support the upper load.

01
Drilling
Bore holes in the affected area with a diameter of 6–10 mm.
02
Injection
Inject a specialized inorganic material.
03
Solidification
The material rapidly solidifies with soil, filling voids and stabilizing the ground.
04
Re-balancing
Lift and reinforce the foundation until re-leveling is achieved.