Infrastructure · Challenges

Infrastructure Foundation Settlement

Stabilize settled building and structure foundations to stop further displacement.

Overview Conditions Engineering approach Project evidence Resources

Engineering overview

Causes of Ground Distress

Foundation soil layers are highly compressible. Under superimposed loads, soil undergoes continuous consolidation and compression, leading to vertical settlement.

Fluctuations in groundwater levels and soil loss worsen differential settlement and cause foundation tilting and deformation.

What to assess

Typical Performance

Cracking of building walls

Foundation tilting and component misalignment

Voiding between floor slabs and foundations

Elevation differences on tracks and pavements

Sticking doors and windows that fail to close

Sinking of piers and pile caps

Staged injection · real-time measurement

Our approach

How Hengxiang Hongye Performs Remediation

Through our non-destructive and controllable patented technology, the weak soil layer of the holding layer is consolidated as a whole, and the consolidated and reinforced foundation soil forms a composite foundation, whose bearing capacity value can reach nearly three times of the original bearing capacity, and well support the upper load.

01
Drilling
Bore holes in the affected area with a diameter of 6–10 mm.
02
Injection
Inject a specialized inorganic material.
03
Solidification
The material rapidly solidifies with soil, filling voids and stabilizing the ground.
04
Re-balancing
Lift and reinforce the foundation until re-leveling is achieved.